HPE Networking CW 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 770W Switch

€1,813.12 €1,474.08

Available To Ship

Networking CW 2150 48p 10M/100M/1G PoE+ 4p SFP+ 1G/10G 770W Switch

Category: Network Switches

Reasons To Buy

Enterprise-class secure and reliable connectivity

The HPE Networking CW 2150 Switch Series delivers up to 176 Gbps of nonblocking bandwidth and up to 131 Mpps forwarding, with nine unit IRF stacking for resilient availability and link redundancy.
The CW 2150 series offers flexible connectivity with four 1G/10G SFP+ uplinks on the 16, 24, and 48 port models, and two 1G SFP plus two 1G/10G SFP+ uplinks on the 8 port model. The 24 port model adds four SFP combo ports.
Advanced Quality of Service (QoS), Internet Protocol version 6 (IPv6) and dynamic L3 protocols (RIP and OSPF) for reliable connectivity
It supports IEEE 802.3az Energy Efficient Ethernet and offers a fanless design on the 8‑, 24‑, and 48‑port non‑PoE models.
Built‑in 6 kV service‑port surge protection helps reduce the risk of power strikes in demanding environments such as construction sites.

Powerful PoE capabilities

The HPE Networking CW 2150 Switch Series provides 125 W, 248 W, 405 W, 390 W, and 770 W Class 4 PoE across the 8‑, 16‑, 24‑, and 48‑port models.
It supports advanced PoE features, including fast PoE that delivers power within seconds of system startup.
Perpetual PoE supports end‑device state monitoring to help maintain power during a power‑source reboot.
The PoE Watchdog function automatically removes power from a port when the connected device is no longer active.

Comprehensive security control

The HPE Networking CW 2150 Switch Series provides security features and network management for modern SMB environments. Secure boot verifies digital signatures to help prevent unauthorized or malicious software from loading at startup.
With HPE IMC, the CW 2150 series supports EAD by integrating terminal‑security policies, network‑access control, and access‑rights enforcement into a unified security framework.
It delivers multi‑layer access protection with granular ACLs (IPv4/IPv6, VLAN, port‑based), identity‑driven policies, and authentication options including 802.1X, MAC, Web, RADIUS, TACACS+, plus Guest VLAN detection and dual‑NIC detection with IMC.
The CW 2150 series provides encrypted access using SSHv2, SSL, SNMPv3, and TLS, along with role‑based privileges and audit logging.
Threat‑prevention features include Control Plane Policing (DoS protection), ARP and DHCP protection, ICMP throttling, port security, and source‑port filtering.

Simple and flexible management

The HPE Networking CW 2150 Switch Series offers Web GUI, industry‑standard CLI management and can be managed with other CW switches through a built-in dashboard for simplified deployment and centralized management.
Advanced management options include HPE Intelligent Management Center (IMC), HPE Networking Management Software (AirWave), SNMP managers, and REST APIs for integration with existing customer dashboards.

Description

HPE Networking CW 2150 Switch Series empowers your business with reliable, high-performance networking tailored for small and medium-sized businesses and branch offices. These fully managed, stackable Layer 3 switches deliver enterprise-grade features without the complexity or high cost. With CW 2150 series, you get seamless management, robust security, and flexibility to scale as your needs grow. Designed for today’s evolving networks, these switches provide affordable excellence—enabling you to connect and protect your business with confidence. Upgrade to the CW 2150 series and experience secure, simple, and powerful networking for your organization.

What is new supporting point:
Enterprise-class, fully managed, stackable Layer 3 switch series with 8‑, 16‑, 24‑, and 48‑port Class 4 PoE and non‑PoE models, four 1G/10G SFP+ uplinks, and up to 770W of Class 4 PoE
Up to 176 Gbps in nonblocking bandwidth, 130 Mpps in forwarding, and up to 9‑switch IRF stack
Flexible connectivity options with four 1G/10G SFP+ uplinks in the 16‑, 24‑, and 48‑port models and two 1G SFP and two 1G/10G SFP+ uplinks in the 8‑port model
Advanced Quality of Service (QoS), IPv6, and dynamic L3 protocols (RIP and OSPF) for reliable connectivity
Fanless design in the 8‑port and 24‑/48‑port non‑PoE models. Supports IEEE 802.3az standard for Energy Efficient Ethernet (EEE)
Managed by Web GUI, CLI, Smart Management Center (SmartMC) web dashboard, HPE Intelligent Management Center (IMC), SNMP, and REST APIs

Specifications

Management features
Switch type	Managed
Ports & interfaces
I/O ports	48 x 10/100/1000BASE-T PoE+ ports 4 x 1/10GBASE-X SFP+ ports 1 x RJ-45 console, 1 x USB Type-C console, 1 x USB and 1 x OOBM management
Data transmission
Throughput	130 Mpps
Switching capacity	176 Gbit/s
Design
Stackable	Yes
Performance
Physical stacking (units)	9
Processor frequency	1200 MHz
Internal memory	512 MB
Built-in processor	Yes
Stackable	Yes
Power
AC input voltage	100 - 240 V
Power consumption note	Idle: 35W Typical: 56W Full load: 969W (PoE 770W)
Power supply note	Fixed, 90–264V, single AC

Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget	770 W
Power over Ethernet (PoE)	Yes
Other features
Latency	1 GE: < 5µs 10 GE: < 3µs (64-byte packets)
Performance management	Web GUI Command Line Interface (CLI) Smart Management Center (SmartMC) HPE Intelligence Management Center (IMC) HPE Networking Management Software (AirWave) REST API SNMP
Memory and processor	CPU: Dual-core Arm at 1.2 GHz Flash: 512 MB SDRAM: 1 GB
Fan	2
Weight (imperial)	5.5 kg (12.1 lbs)
I/O ports	48 x 10/100/1000BASE-T PoE+ ports 4 x 1/10GBASE-X SFP+ ports 1 x RJ-45 console, 1 x USB Type-C console, 1 x USB and 1 x OOBM management
Dimensions (W x D x H) (imperial)	380 x 549.9 x 125 mm (15 x 21.6 x 4.92")
Operational conditions
Operating temperature (T-T)	-5 - 50 °C
Heat dissipation	3306 BTU/h
Weight & dimensions
Width	380 mm
Depth	549.9 mm
Height	125 mm
Weight	5.5 kg
Weight (imperial)	5.5 kg (12.1 lbs)
Dimensions (W x D x H) (imperial)	380 x 549.9 x 125 mm (15 x 21.6 x 4.92")
Technical details
Physical stacking (units)	9
Stackable	Yes
Processor frequency	1200 MHz
Built-in processor	Yes
Memory
Internal memory	512 MB

You may also be interested in

Compare Products
Product	New HPE Networking CW 2150 48p 10M/100M/1G... €1,813.12 €1,474.08	Popular PLANET IGS-6325-24P4X network switch M... €1,511.19 €1,228.61	PLANET GS-6320-46S2C4XR network switch... €1,547.86 €1,258.42	Bestseller NETGEAR M4250-10G2XF-PoE++ Managed L2/... €2,178.19 €1,770.89	Recommended Axis 01192-002 network switch Managed... €1,646.69 €1,338.77	Hot Product PLANET UPOE-2400G network switch Gigab... €1,479.31 €1,202.69
SKU	S6X54A	IGS-6325-24P4X	GS-6320-46S2C4XR	GSM4212UX-100EUS	01192-002	UPOE-2400G
Manufacturer	HPE	Planet	Planet	Netgear	Axis	Planet
Rack mounting	N/A	Y	Y	Y	Y	Y
Power over Ethernet (PoE)	Y	Y	N	Y	Y	Y
Stackable	Y	N/A	N/A	N/A	N/A	N/A
Switch type	Managed	Managed	Managed	Managed	Managed	N/A
Basic switching RJ-45 Ethernet ports quantity	N/A	22 to 24	46 to 48	9 to 10	22 to 24	46 to 48
Basic switching RJ-45 Ethernet ports type	N/A	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)	Gigabit Ethernet (10/100/1000)